One of the greatest dreads regarding residential repair in Montgomery, TX, is that the job is not done correctly. The same goes for roofing installation, but the chances of that being done poorly are slimmer than repair because it is more difficult to fudge an entire roof than it is a few shingles. If you are having residential roofing repairs done, look out for these common mistakes.
Roofing types are not all the same. They have different materials and installation processes. There are also a lot of different products that are required that match the type of building, roof slope, climate, and much more. A competent roofer will understand the materials needed for your roof and will ensure that their residential roofing contractors use the right materials, every time, for your entire roof.
Most residential roofing companies will recommend a leak barrier system that protects both your roof and the rest of your home from the elements. These should be installed wherever there might be a leak or where one might happen. These areas include valleys, rakes, and chimneys. Your residential roofing company contractor can outline for you areas of your roof that need to be sealed before they start doing it in order to ensure that nothing is missed.
Drip edges are mandated by the International Building Code because they help avoid premature decay and rot of the deck and fascia of your house. They need to be included in any estimate for work by residential roofing companies and they need to be up to the building code specifications.
These act as a barrier against water that might go into the seams of the first layer of shingles. They need to be installed under the first row up until the rake begins. Ask your contractor about their procedure regarding installing starter shingles and make sure they are part of the installation standard operating procedure.
Nail placement is key to making sure the shingles on a roof are secure. Unfortunately, because of ignorance or rushing to get a job done, nail placement is often overlooked or carelessly executed and monitored. The result can be shingles that are not affixed properly, and that break and wear out prematurely.
While the vast majority of roofers and roofing contractors are safe, many cut corners as it pertains to safety precautions. This is not acceptable, whether they are doing a new installation, rip-up and installation, or individual repairs. Safety equipment does more than help ensure the safety of workers.
It covers the roofing company if an accident occurs, and it protects you as a homeowner from any type of a lawsuit if a worker is injured while working on your roof.
The best-laid estimates can go by the wayside once workers get into a job and start to install or repair roofing on an existing structure. Make sure you see the estimate beforehand and go over it with your roofing company or contractor. Ask them about anything on the estimate you do not understand or are not sure about. Also, make sure you have a very clear estimate modification approval process in place to avoid a more expensive, late change to an invoice.
Getting a roof installed or your existing roof repaired should always bring you peace of mind. Making sure these common errors are addressed beforehand is one way to reduce the possibility of a surprise at the end. For more information, please visit AM Commercial / Residential Roofing.